Our Products
Brand: AIRCRAFT
MPN: SG COMPSP-01
AirCraft Capacitor (Capacitance) SG-COMPSP-01 For Comp04 And Comp06
At a Glance: Motor run capacitor rated 4uF ±5% 450V AC for AirCraft Comp04 and Comp06.
The AirCraft SG-COMPSP-01 Capacitor (listed as “Capacitance”) is a key electrical component used to help the compressor motor run efficiently and reliably.
In many single-phase motors, a run capacitor supports correct phase shift and smoother motor operation—helping reduce strain, improve starting behaviour, and maintain cons..
N$ 78.20
Ex VAT:N$ 68.00
Brand: AIRCRAFT
MPN: SG COMPSP-02
AirCraft Cylinder SG-COMPSP-02 For All Mini Compressors
At a Glance: Replacement cylinder sleeve for AirCraft mini compressors—helps restore strong compression and smooth pumping.
The AirCraft SG-COMPSP-02 Cylinder is a replacement cylinder sleeve used in AirCraft mini compressor units.
Inside a compressor, the cylinder is where the piston does its work—building pressure with each stroke. Over time, wear, scoring, heat, or contamination can reduce sealing and efficiency, leadin..
N$ 89.24
Ex VAT:N$ 77.60
Brand: AIRCRAFT
MPN: SG COMPSP-03
AirCraft Pressure Switch SG-COMPSP-03 For Comp 04
At a Glance: Pre-wired replacement pressure switch for AirCraft Comp 04—controls automatic start/stop based on system pressure.
The AirCraft SG-COMPSP-03 Pressure Switch is a dedicated replacement pressure control switch for the AirCraft Comp 04.
Its job is to monitor pressure and manage the compressor’s automatic cycling: switching the compressor on when pressure drops (cut-in) and switching it off when the target pressure is r..
N$ 221.38
Ex VAT:N$ 192.50
Brand: AIRCRAFT
MPN: SG COMPSP-04
AirCraft Cylinder O-ring / Gasket Seal SG-COMPSP-04 For All Mini Compressors
At a Glance: Gasket-style sealing ring for the cylinder on AirCraft mini compressors—helps stop leaks and restore compression.
The AirCraft SG-COMPSP-04 Cylinder O-ring is best treated as a gasket seal: a sealing ring that sits at the cylinder interface to prevent air escaping where it shouldn’t.
On mini compressors, a tight cylinder seal is everything—if the seal is worn, flattened, or nicked, you can ..
N$ 18.86
Ex VAT:N$ 16.40
Brand: AIRCRAFT
MPN: SG COMPSP-05
AirCraft Front And Rear Bearing SG-COMPSP-05 For All Mini Compressors
At a Glance: Replacement front and rear bearing set for AirCraft mini compressors—helps bring back smooth, quiet operation.
The AirCraft SG-COMPSP-05 Front And Rear Bearing set is a service replacement for AirCraft mini compressors, designed to support the rotating shaft/motor assembly and keep everything running smoothly.
Bearings do a tough job in a small compressor—high speed, heat, vibration, and long run ..
N$ 64.17
Ex VAT:N$ 55.80
Brand: AIRCRAFT
MPN: SG COMPSP-06
AirCraft Regulator and Filter for All Mini Comp 1/4" x 1/4" M (SG COMPSP-06)
At a Glance: Compact regulator + moisture filter with gauge, 1/4" x 1/4" male connections
The AirCraft SG COMPSP-06 Regulator and Filter is the simple upgrade that makes a mini compressor setup feel properly “dialled in”. It combines an adjustable pressure regulator with a moisture/filter bowl and an easy-to-read gauge, helping you deliver cleaner, steadier air to your tool. That means better control for airbrush ..
N$ 542.80
Ex VAT:N$ 472.00
Brand: AIRCRAFT
MPN: SG COMPSP-06A
AirCraft Regulator and Filter for All Mini Comp 1/4" x 1/8" M (SG COMPSP-06A)
At a Glance: Compact regulator + moisture filter with gauge, 1/4" x 1/8" male connections
The AirCraft SG COMPSP-06A Regulator and Filter is a compact, practical upgrade for mini compressor air lines where clean, stable air makes all the difference. It combines an adjustable pressure regulator with a moisture/filter bowl and an easy-to-read gauge, helping reduce condensation carry-over while giving you better con..
N$ 493.35
Ex VAT:N$ 429.00
Brand: AIRCRAFT
MPN: SG COMPSP-07
AirCraft Feet SG-COMPSP-07 For SG-COMP04 And SG-COMP05
At a Glance: Replacement anti-vibration foot for SG-COMP04/SG-COMP05—adds grip, stability and reduces vibration transfer.
The AirCraft SG-COMPSP-07 Feet are replacement anti-vibration compressor feet designed for the SG-COMP04 and SG-COMP05 mini compressor units.
A good compressor foot does three important jobs: it stabilises the machine, absorbs vibration, and protects the surface underneath from scuffs and marks.
If ..
N$ 18.86
Ex VAT:N$ 16.40
Brand: AIRCRAFT
MPN: SG COMPSP-08
CYLINDER HEAD BOLT FOR ALL MINI COMPRESSORS....
N$ 11.39
Ex VAT:N$ 9.90
Brand: AIRCRAFT
MPN: SG COMPSP-09
AirCraft Pressure Switch SG-COMPSP-09 For Comp 05, Comp06 And Comp07
At a Glance: Pre-wired replacement pressure switch for AirCraft Comp 05/Comp06/Comp07—controls automatic start/stop based on system pressure.
The AirCraft SG-COMPSP-09 Pressure Switch is a dedicated replacement pressure control switch for the AirCraft Comp 05, Comp06 and Comp07 mini compressor units.
This switch helps manage the compressor’s automatic cycling by monitoring system pressure: switching the compres..
N$ 214.48
Ex VAT:N$ 186.50
Brand: AIRCRAFT
MPN: SG COMPSP-10
AirCraft Power Switch SG-COMPSP-10 For Comp 05, Comp06 And Comp07
At a Glance: Panel-mount rocker power switch for AirCraft Comp 05/Comp06/Comp07—simple, dependable on/off control.
The AirCraft SG-COMPSP-10 Power Switch is a replacement rocker on/off switch designed for the AirCraft Comp 05, Comp06 and Comp07 mini compressor units.
When a switch starts failing, the symptoms are classic: intermittent power, a switch that won’t latch, or a compressor that only runs when the button..
N$ 46.46
Ex VAT:N$ 40.40
Brand: AIRCRAFT
MPN: SG COMPSP-11
AirCraft Muffle (Muffler / Silencer) SG-COMPSP-11 For Comp 05, Comp06 And Comp07
At a Glance: Threaded compressor muffler/silencer with porous insert to help reduce operating noise on Comp 05/Comp06/Comp07.
The AirCraft SG-COMPSP-11 Muffle is a small but clever noise-control component—essentially a muffler/silencer used on the AirCraft Comp 05, Comp06 and Comp07 mini compressor range.
Fitted to the appropriate port (model dependent), it helps soften the sharp “hiss” and mechanic..
N$ 28.29
Ex VAT:N$ 24.60